Insert the SIM, memory card, and battery
Learn how to insert the battery and SIM and memory cards.
Important: This device is designed to be used with a standard SIM card (see figure) only. Use of
incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card.
Please consult your mobile operator for the use of a SIM card that has a mini-UICC cutout.
Use only compatible memory cards approved for use with this device. Incompatible cards may damage
the card and the device and corrupt data stored on the card.
Note: Switch the device off and disconnect the charger and any other device before removing any
covers. Avoid touching electronic components while changing any covers. Always store and use the
device with any covers attached.
1.
Place your fingernail in the small slot at the bottom of the phone, lift and remove the cover.
2.
If the battery is in the phone, lift it out.
3.
Slide the SIM into the slot with the contact area face down.
4.
If you have a memory card, slide the memory card into the memory card slot.
5.
Line up the battery contacts, and put the battery in.
6.
Replace the back cover.
Remove the SIM card
Open the back cover, remove the battery, and slide the SIM out.