S e t t i n g s
59
Date
In the standby mode, select
Menu
>
Settings
>
Time and date
>
Date
>
Show date
or
Hide date
,
Set the date
,
Date format
, or
Date separator
.
Date and time auto-update
Auto-update is a network service. See "Network services," p. 5. If your network
operator supports this feature, you can allow the digital network to set the clock,
which is useful when you are out of your home area, for instance when you have
traveled to another network or time zone.
In the standby mode, select
Menu
>
Settings
>
Time and date
>
Auto-update of
date & time
>
On
,
Confirm first
, or
Off
.
If you use the
Auto-update of date & time
option while outside your digital
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you reenter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (when the battery is replaced or
recharged, and you are still outside of the digital network).
■
Call settings
Location info sharing
Location info sharing is available for the Nokia 6155i device. Location info
sharing is a network service. See "Network services," p. 5.
If your wireless service provider supports this feature, then location info sharing
allows the device to share position information over the network. For calls to
emergency numbers, this position information may be used by the emergency
operator to determine the position of the device. The functionality and accuracy
of this feature are dependent on the network, satellite systems, and the agency
receiving the information. This feature may not function in all areas or at all times.
In the standby mode, select
Menu
>
Settings
>
Call
>
Location info sharing
>
Emergency
or
On
.
Emergency
—This is the default profile. The device location information is shared only
during an emergency call to the official emergency number programmed into your
device. The screen displays
in the upper left hand corner in the standby mode.
On
—The device location information is shared with the network whenever the
device is powered on and activated. The screen displays
in the upper left
hand corner in the standby mode.
