S e t t i n g s
70
The
Network
menu enables you to customize the way your device chooses a
network in which to operate while you are within or outside of your primary or
home system. Your device is set to search for the most cost-effective network. If
your device cannot find a preferred network, it selects a network automatically
based on the option you choose in the
Network
menu.
Roaming options
You can set your device to roam or search for another network when you are not
in your home area.
1. In the standby mode, select
Menu
>
Settings
>
Network
>
Roaming options
and one of the following options:
Home only
—You can make and receive calls in your home area only.
Automatic
—The device automatically searches for service in another digital
network. With no service found, the device uses analog service. The roaming
rate applies when not in the home service area.
2. Select
OK
, if necessary, to confirm the activation.
Mode
You can choose whether your device uses digital or analog service. In the standby
mode, select
Menu
>
Settings
>
Network
>
Mode
and one of the following
service options:
Digital preferred
—The device works in digital mode but will also work in analog
mode with digital mode unavailable.
Digital only
—The device only works in digital mode.
Analog only
—The device only works in analog mode.
■
Network services
The following features are network services. See "Network services," p. 5.
Store a feature code
1. In the standby mode, select
Menu
>
Settings
>
Network services
>
Network
feature setting
.
2. Enter the feature code from your network operator (for example, *633), and
select
OK
.
3. Select the type of service that matches the feature code you entered (for
example,
Call forwarding
).
