Chapter 5 - Fax
5-1
5. Fax
Activate the Fax application by pressing the but-
ton labeled “Fax” on the communicator interface
keyboard.
To send and receive faxes the following require-
ments must be met:
• The phone interface must be on.
• The network you are using must support fax
calls.
• Your SIM card must be activated for fax
service.
Contact your network operator for details.
When sending or receiving a fax, the FAX indica-
tor appears in the display’s indicator row.
The Fax application main view shows:
• Own texts folder — Includes created faxes,
short messages, memos, notes and e-mail
stored on the communicator.
• Received faxes folder — Contains received
faxes.
• Document outbox — See Chapter 12
”Document outbox” on page 12-1.
Fax settings
To view the Fax application settings:
Press
Settings
in the Fax main view. A list of
settings will open. These are the default
sending options for your faxes.
To change the settings:
Select a setting and press
Change
to open it.
The fax settings are:
Cover page — Header (default) / Separate page /
None.
Header — The cover page contents (To/From,
Fax numbers, etc.) will be included at the top
of the first page of the fax.
Separate page — The first page of the fax will
contain only the cover page contents.
None — No cover page information will be
attached to the fax. The first page of the doc-
ument will be the first page of your fax.
Begin sending — Immediately (default) / At
[time] Lets you choose when the fax is sent.
Immediately — The fax is sent right away.
At [time] — You can determine the time when
the fax is sent. This option may enable you to
take advantage of cheaper calling times.
Receive resolution — Standard / Fine (default).
Standard — The fax will be received using 200
(width) x 100 (height) dots per inch resolution.
Fine — The fax will be received using 200 x
200 dpi resolution. Receiving faxes with fine
resolution will take longer and requires ap-
proximately twice as much memory as with
standard resolution.
Send resolution — Standard / Fine (default).
Sending faxes with fine resolution takes longer
and temporarily requires more free memory than
when using standard resolution
Logo file — None (default) / [File name]. Enables
you to add your company’s logo to the fax cover
page. Although the logo is not shown when view-
ing the Cover page, it will appear on the sent fax.
None — No logo is attached to the fax.
