Nokia DC-14, User Manual

ENGLISH

Mount the dynamo

Only use the supplied dynamo with 
the charger.

Attach the dynamo to the 
mounting bracket

To attach the dynamo to the mounting 
bracket, use the supplied bolt, nut, 
and washer (12). Make sure the 
bracket is firmly attached to the 
dynamo.

Attach the bracket to the 
front fork

To attach the mounting bracket to the 
right side of the front fork on your 
bicycle, use the supplied bolts, nuts, 
and screw (13). Make sure the bracket 
is firmly attached to the fork.

Mount the dynamo against 
the tyre

To mount the dynamo against the 
tyre, place the friction roller at the 
correct angle, height, and distance to 
the tyre (14) so that it properly 
touches the side of the tyre when you 
press the lever (15). Position the 
dynamo correctly using the 
adjustment bolt (16).

To detach the roller from the tyre, pull 
the dynamo away from the tyre (17).

Attach the electric wire

To attach the electric wire to the 
dynamo, firmly press and hold the 
latch at the bottom of the dynamo 
upwards (18), guide the bare end of 
the wire through the hole (19), and 
release the latch to lock the wire 
in place.