12
FastMile 5G Gateway User Guide
Issue 1.0
Connect the power adapter on bottom of
your FastMile 5G Gateway and plug it then
into an electrical outlet.
NOTE
Ensure that cables do not block the air flow on the bottom
of the FastMile 5G Gateway to avoid overheating.
Start up sequence
Press the Power On button on the bottom of the
FastMile 5G Gateway and place it on intended
location.
The Center LED and 5G LED turn purple at the
beginning. Later, the five 5G Signal Direction
LEDs turn on for a few seconds and turn off. The Center LED turns
red and remains red until the antenna(s) begin to scan for a signal.
The Center LED in red indicates that the Gateway has no WAN
connectivity which is normal at this stage before antenna scan.