Installation procedure
48
Nokia FastMile Outdoor Unit User Manual
3TG-00088-AAAA-TCZZA
Issue: 01P03
6.3.1
Lightning protection
Be sure to observe the following lightning protection information:
6.4
Installation steps for the Nokia FastMile
Outdoor Unit
The Nokia FastMile Outdoor Unit can be installed by using the Nokia Field Assistant
app in conjunction with the following steps.
The Nokia Field Assistant app must be installed on a mobile phone as indicated in
section
before you start the Nokia FastMile Outdoor Unit installation procedure.
The following need to be considered before the start of Nokia FastMile Outdoor Unit
installation procedure:
•
Follow the installation steps with exact order described in Procedure
•
During the installation procedure and especially during base station location, you
need to avoid sending the Nokia Field Assistant app to background or press back
and forth options, otherwise the procedure will fail and you won't be able to
register again the Subscription ID since it will be considered already registered.
•
During installation the procedure you need to ensure that the connection between
the Nokia Field Assistant app and the Nokia Altiplano FastMile Controller (WiFi or
LTE) and the connection between the Nokia Field Assistant app and the Nokia
FastMile Outdoor Unit (Bluetooth and VPN) will not be lost otherwise installation
will fail.
•
You need to finish the Nokia FastMile Outdoor Unit installation procedure within
<<
number needed
>> minutes from the time the Nokia Field Assistant app is
connected to the Nokia Altiplano FastMile Controller, otherwise the installation
procedure will fail.
Danger —
If you are installing the Nokia FastMile Outdoor Unit
above roof level, check that lightning rods are above the
planned installation location.
PoE+ capable surge protectors should be used if the outside
cabling is longer than 10 meters (32 feet). If the outside cable
length is less than 10 meters (32 feet), no protection is required.
Only use a properly earthed wall socket for powering the indoor
unit or PoE+ injector.