background image

 

 

© 2021 Nokia. Nokia Confidential Information. Use subject to agreed restrictions on disclosure and use.

 

If you have received this document in error, do not use or copy this document for any purpose nor disclose its contents to any other person. 

 

 

3FE-45458-AAAA-TCZZE 

Issue 1, October 2021 

Nokia ONT G-010G-T Quick Reference Guide

 

basement, or near a swimming pool. Do not spill any liquid on 
the Product.   

 

Do not touch the Product or its power adapter or cord with wet 
hands.   

 

Do not place the Product on an unstable surface or support.   

 

Do not place heavy objects on top of the Products.   

 

Do not use liquid or aerosol cleaners; unplug the Product and 
use a soft, dry cloth for cleaning.   

 

When connecting a PC or other electronic device to a Product, 
make sure you use the right cables and connect the device to 
the right port of the Product. Incorrect connections may damage 
the device and/or the Product.   

 

Do not open or try to open the Product. Opening or removing 
covers can expose you to dangerous high voltage points or other 
risks.   

It is recommended that users and other individuals maintain a 
distance of at least 10 cm between themselves and the Product to 
avoid exposure. The Product contains components that emit an 
electromagnetic field and could interfere with pacemakers or other 
electronic medical devices. If you have a pacemaker or other 
implantable or personal medical device, please consult your physician 
or medical device manufacture about the required minimum safe 
distance between the Product and your medical device.   

Keep your product and accessories out of reach of pets. They could 
damage it and cause injury or electrocuting.  

If the Product malfunctions or fails to perform as expected, stop 
using it immediately.   

The product is expected to operate at a temperature of -5 to 45 
degrees Celsius for a relative humidity between 5% and 95%.  

3.

 

Install the ONT 

1.

 

Connect the power cable to the case on the PWR power port. 

2.

 

Connect the power socket to the wall socket  

3.

 

Remove the protective cap on the OPTICAL port of the case.  

4.

 

Remove the protective cap from the fiber optic.  

5.

 

Connect the optical fiber to the optical port of the case.  

6.

 

Connect the case to the home router via the Ethernet cable.  

7.

 

Push the ON/OFF button to be “ON”

4.

 

EU Declaration of Conformity  

Hereby, Nokia Solutions and Networks Oy declares that 
the Product is in compliance with Low Voltage Directive 2014/35/EU; 
EMC Directive 2014/30/EU, Directive RoHS 2011/65/EU and 
2015/863/EU, and Directive Eco-design 2009/125/EC. The full text 
of the EU declaration of conformity, as well as additional compliance 
information, is available at 

www.nokia.com/notices/declaration-of-

conformity/

.  

Products are for indoor use only. 

Specific precautions for EMC Warning  

 

The  Products  are compliant  with  Class  B  of  EN  55032.  In 
a residential environment,  this  equipment  may  cause  radio 
interference.  The  Products  are  tested  to  the  requirements  of  EN 
55032  (Emissions)  and  EN  55024  (immunity).  There  are  no  specific 
precautions  which  must  be  taken  in  order  to  comply  with  the 
requirements  of  Directive  2014/30/EU  Essential  Requirements  in 
Section 1 of Annex I. In addition, the Products are further tested to 
ensure spurious emissions are within the specified limits,  as well as 
meeting  the  requirements  for  adaptivity,  which  mitigates  against 
problems  caused  by  co-location  with  other  wireless  products.  The 
Products are not subject to the requirements in Section 2 of Annex I 
of Directive 2014/30/EU for fixed installations.   

End of Life Collection and Treatment   

In  the  European  Union and  European  Economic  Area, 
this  label  indicates  that  this  product  should  not  be 
disposed  of  with  household  waste.  It  should  be 
deposited in an appropriate facility to enable recovery 
and recycling.   

The Product is marked with this symbol, which is known 

as the WEEE mark. WEEE stands for Waste Electronics and Electrical 
Equipment. Electronic products bearing or referencing the WEEE mark 
shown  above,  when  put  on  the  market  within  the  European  Union 
(EU) and European Economic Area (EEA), shall be collected and treated 
at the end of their useful life, in compliance with applicable EU and 
local  legislation.  They  shall  not  be  disposed  of  as  part  of  unsorted 
municipal  waste.  Due  to  materials  that  may  be  contained  in  the 
Product,  such  as  heavy  metals  or  batteries,  the  environment  and 
human health may be negatively impacted as a result of inappropriate 
disposal.   

At the end of their life, the Products are subject to the applicable local 
legislations  that  implement  the  European  Directive  2012/19EU  on 
WEEE.  There  can  be  different  requirements  for  collection  and 
treatment in different member states of the European Union.   

In  compliance  with  legal  requirements  and  contractual  agreements, 
where  applicable,  Nokia  will  offer  to  provide  for  the  collection  and 
treatment  of  Products  bearing  the  logo  above  at  the  end  of  their 
useful  life,  or  Products  displaced  by  Nokia  equipment  offers.  The 
equipment can be disposed at electronic waste collection points or to 
stores that sell electronics.   

For  information  regarding  take-back  of  equipment  by 
Nokia,  or  for  more  information  regarding  the 
requirements  for  recycling/disposal  of  the  Product, 
contact your  service  provider.  Regulatory  compliance 

information, including EU Declaration of Conformity, can be found at 

www.nokia.com/notices/declaration-of-conformity/

.   

CID 210920

Reviews: