Configure a G-2426G-B indoor ONT
Network configuration
Configuring Upstream (US) Classifier
Nokia ONT
3FE-49441-ABAA-TCZZA
June 2021
Issue 1
144
Table 8-23 US Classifier parameters (continued)
Field
Description
Source IP
Click to enter a source IP address.
Destination IP
Click to enter a destination IP address.
Source Port
Click to enter a source port.
Destination Port
Click to enter a destination port.
Protocol
Click to enter a protocol.
Priority
Select a priority level from 1 to 8. The lower the number, the higher the priority. No more
than 1 classifier can be created with the same priority.
6
Click
Save
.
Click
Reset
to reset the classifier configured.
Click
Refresh
to view the up-to-date information.
Click
Delete
for the applicable classifier in the classifier table, to delete a classifier.
Note:
A classifier can only be deleted if it is not associated with any classifier rules.
7
Select the
Classifier Rules
tab.
All classifier rules are displayed in the classifier rules table in the page.