background image

GB 14

Navi Bars

Navigating with Navi Bars  

 

 

Navi Bars are used for selecting TV/Radio channels and to enter
menus in which you can perform different settings. 

1. Display Navi Bars by pressing the 

navi 

or

 ok

 button; to hide them,

press the 

back

 button. 

2. When Navi Bars are displayed, you can move the folders in

horizontal and vertical directions with the 

 

 

cursor

buttons. 

The horizontal row contains 

folders

, e.g. TV, Radio and the Settings

folder. Each folder contains one or more 

bookmarks

• To move a folder into focus, use the 

 

buttons. 

• When a folder is in focus the bookmarks will be shown in the

vertical row. 

• You select a bookmark using the 

 

buttons. 

• To confirm the selection of, e.g., a TV channel or to open a book-

mark, press the 

ok

 button. 

Below the horizontal folder bar, there is an Information box for the
currently highlighted bookmark.   

When scrolling through TV or radio channels, the programmes can
be marked with the following symbols in the Information box: 

 =   a new channel you have not yet visited

 =   the channel is locked by the user 

 =   the channel is encrypted

Info

 displays extended information, if available, for a highlighted

programme or function.   

  

If you open the Navi Bars and do not press any buttons on the
remote control, the Navi Bars will automatically close after half a
minute.

The Settings folder   

Each of the bookmarks in the Settings folder contains 

menus

 from

where you can change the settings of the Mediamaster. 

For some of the menus, you will be asked to enter your access code. 

The access code is set to 1234 at the factory

The settings folders can not be deleted.

Bookmark

Bookmark 
name

Highlighted 
bookmark

Information box

Folder 
name

Folder

Navi Bars

Summary of Contents for Mediamaster 120 C

























Reviews: