Nokia Mediamaster 120 C, User Manual

GB 8

Connecting the Mediamaster & First-time installation

About Smart card 

The Mediamaster is equipped with a built-in decoder for the 

Conax

encryption system

.

Insert a valid

 smart card 

fully into the slot

on the back of the 

Mediamaster. The gold chip must face 

downwards and inwards

.

Connecting a Hi-fi system

It is possible to connect a TOS link cable from the Digital audio out-
put on the Mediamaster to a Hi-fi system that is equipped with the
corresponding audio input. 

• Also use the TOS link Digital audio output for connection to an 

external Dolby digital/DTS decoder.

First-time installation general information  

Once you have correctly connected the Mediamaster, you will also
have to perform a "First-time installation." During this procedure,
helpful information is displayed at the bottom of the menus.    

The 

ok

 button always confirms a selection within the menus, and

pressing it will take you to the next step in the installation proce-
dure. However, more than one value sometimes have to be entered
in a menu. First, perform all necessary settings on the different
lines. Then, confirm them all simultaneously by pressing 

ok

.

• You can always return to the previous menu by pressing 

back

. 

• Use  the 

cursor up/down

 button to move upwards and down-

wards from one line to another.

• Use  the 

cursor left/right

 button to change settings 

You also use the number buttons on the remote control to enter nu-
meric values.