GB 7
Refer to your video recorder manual for full instructions.
Ÿ
Connect one SCART cable between the main
SCART socket on the TV and the TV SCART
socket on the Mediamaster.
Ÿ
Connect another SCART cable between the VCR
and the VCR SCART socket on the Mediamaster.
Ÿ
Connect the RF cable from the RF output on the
VCR to the TV aerial input on the TV.
Ÿ
Connect the TV aerial to the RF input socket on the
VCR.
Ÿ
Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ
Connect an RF cable from the RF output on the
VCR to the TV aerial input on the TV.
Ÿ
Connect an RF cable from the TV/VCR output on the
Mediamaster to the RF input socket on the VCR.
Ÿ
Connect the TV aerial to the TV AERIAL input
socket on the Mediamaster.
Ÿ
Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ
Connect a SCART cable between the VCR and the
VCR SCART socket on the Mediamaster.
Ÿ
Connect an RF cable from the RF output on the VCR
to the TV aerial input on the TV.
Ÿ
Connect an RF cable from the RF output on the
Analogue receiver to the RF input socket on the VCR.
Ÿ
Connect the TV aerial to the RF input socket on the
Analogue receiver.
In order to switch the signal from the dish between
the analogue and digital receivers, you need a
Universal Twin LNB.
Ÿ
Cable A between output
A
on the LNB to the LNB socket
on the analogue receiver
.
Ÿ
Cable B between output
B
on the LNB to the ANTENNA socket
on the Mediamaster
.
Both the VCR and the analogue satellite receiver must be tuned to different UHF channels (than the
Mediamaster) when using RF-connectors.
Connecting to a TV and a Video recorder
If Your VCR does not have a SCART connector
Connecting to an Analogue satellite receiver and
a Video recorder
