EN - 36
Nokia Sleep
v1.0 | April 2018
Cleaning and maintenance
Cleaning my Nokia Sleep
To clean the textile cover of the Nokia Sleep, gently remove the cover first. Note that the
cover can be machine washed, but do not tumble dry or iron it. We recommend you to wait
until the cover is completely dry before replacing it on Nokia Sleep.
Do not, under any circumstance, use any solvent to clean your Nokia Sleep.
Deflating my Nokia Sleep
To defalte your Nokia Sleep, perform the following steps:
1. Make sure to place the inner part of the Nokia Sleep out of its textile cover.
2. Put the lower part towards you.
A notch with the word Reset below indicates the location of the reset button.
3. Unplug, then plug Nokia Sleep using the provided adapter.
4. Press the reset button successively three times.
A slight click indicates that the Nokia Sleep valve is open. The sensor should slightly
deflate.
Important
: Keep the sensor plugged during the whole process. When the sensor is
unplugged, the valve closes and prevents any air input/output of the Nokia Sleep. Note
that the valve closes after 3 minutes.