© 2021 Nokia. Nokia Confidential Information. Use subject to agreed restrictions on disclosure and use.
If you have received this document in error, do not use or copy this document for any purpose nor disclose its contents to any other person.
3FE-46541-AAAA-TCZZB
Issue 1, October 2021
Nokia ONT G-010S-A Quick Reference Guide
It is recommended that users and other individuals maintain a
distance of at least 10 cm between themselves and the Product to
avoid exposure. The Product contains components that emit an
electromagnetic field and could interfere with pacemakers or other
electronic medical devices. If you have a pacemaker or other
implantable or personal medical device, please consult your physician
or medical device manufacture about the required minimum safe
distance between the Product and your medical device.
Keep your product and accessories out of reach of pets. They could
damage it and cause injury or electrocuting.
If the Product malfunctions or fails to perform as expected, stop
using it immediately.
The product is expected to operate at a temperature of -40 to 85
degrees Celsius for a relative humidity between 5% and 95%.
3.
Install the ONT
1.
Power off the host device.
2.
Hold the product firmly by the wider section between the thumb
and index fingertips. Push it into the SFP socket until the
bottom.
3.
With both hands’ thumbs, push the external end of the product
until you feel the click that it is locked. Make sure not to remove
the protection cap during this operation.
4.
Remove the protection cap with one hand, while you hold the
optical fiber cord with the other hand.
5.
Plug the fiber connector to the optical connector in the product.
6.
Power on the host device.
4.
EU Declaration of Conformity
Hereby, Nokia Solutions and Networks Oy declares that
the Product is in compliance with Low Voltage Directive 2014/35/EU;
EMC Directive 2014/30/EU, Directive RoHS 2011/65/EU and
2015/863/EU, and Directive Eco-design 2009/125/EC. The full text
of the EU declaration of conformity, as well as additional compliance
information, is available at
www.nokia.com/notices/declaration-of-
This product is a component of industrial range (extended operation
temperature), but suitability of indoors or outdoors depends on the
dissipation of the host device.
Specific precautions for EMC Warning
The Products are compliant with Class B of EN 55032. In
a residential environment, this equipment may cause radio
interference. The Products are tested to the requirements of EN
55032 (Emissions) and EN 55024 (immunity). There are no specific
precautions which must be taken in order to comply with the
requirements of Directive 2014/30/EU Essential Requirements in
Section 1 of Annex I. In addition, the Products are further tested to
ensure spurious emissions are within the specified limits, as well as
meeting the requirements for adaptivity, which mitigates against
problems caused by co-location with other wireless products. The
Products are not subject to the requirements in Section 2 of Annex I
of Directive 2014/30/EU for fixed installations.
End of Life Collection and Treatment
In the European Union and European Economic Area,
this label indicates that this product should not be
disposed of with household waste. It should be
deposited in an appropriate facility to enable recovery
and recycling.
The Product is marked with this symbol, which is known
as the WEEE mark. WEEE stands for Waste Electronics and Electrical
Equipment. Electronic products bearing or referencing the WEEE mark
shown above, when put on the market within the European Union
(EU) and European Economic Area (EEA), shall be collected and treated
at the end of their useful life, in compliance with applicable EU and
local legislation. They shall not be disposed of as part of unsorted
municipal waste. Due to materials that may be contained in the
Product, such as heavy metals or batteries, the environment and
human health may be negatively impacted as a result of inappropriate
disposal.
At the end of their life, the Products are subject to the applicable local
legislations that implement the European Directive 2012/19EU on
WEEE. There can be different requirements for collection and
treatment in different member states of the European Union.
In compliance with legal requirements and contractual agreements,
where applicable, Nokia will offer to provide for the collection and
treatment of Products bearing the logo above at the end of their
useful life, or Products displaced by Nokia equipment offers. The
equipment can be disposed at electronic waste collection points or to
stores that sell electronics.
For information regarding take-back of equipment by
Nokia, or for more information regarding the
requirements for recycling/disposal of the Product,
contact your service provider. Regulatory compliance
information, including EU Declaration of Conformity, can be found at
www.nokia.com/notices/declaration-of-conformity/
5.
FCC Declaration of Conformity
This device complies with part 15 of the U.S. FCC Rules.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) these devices must
accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
CID 210921
