RM-12
CCS Technical Documentation
28
COMPANY CONFIDENTIAL
Issue 1 11/2004
Copyright © 2004 Nokia. All Rights Reserved.
Synthesizer
General instructions for synthesizer troubleshooting
Connect test jig to computer with DAU9S cable or to FPS-8 Flash Prommer with XCS-4 mod-
ular cable.
Make sure that you have PKD-1 dongle connected to the computer’s parallel port.
Connect DC power supply or FPS-8 to module test jig with PCS-1 cable.
Set the DC supply voltage to 4.2V.
Set the phone module to test jig and start Phoenix service sofware.
Initialize connection to phone. (Use FBUS driver when using DAU9S, COMBOX driver when
using FPS-8.)
Select product from the menu:
File -> Choose product -> RM-12
From toolbar, set operating mode to "Local"
Activate RF controls window from the menu:
Testing -> RF Controls
From the RF controls window:
•
Select band "GSM900", "GSM 1800" or "GSM1900" (Default =
"GSM900")
•
Set Active unit to "Rx" (Default = "Rx")
•
Set Operation mode to "Continuous" (Default = "Burst")
•
Set Rx/Tx channel to 37 on GSM900 band, 700 on GSM1800 band, 661
on GSM1900 band (Defaults)
