RM-127
Nokia Customer Care
5 - Disassembly Instructions
8
COMPANY CONFIDENTIAL
Issue 1 11/2005
Copyright © 2005 Nokia. All Rights Reserved.
13.) To remove the
A-COVER ASSY,
lift it a little
bit and move it in the opposite direction than the
B-COVER ASSY
.
14.) Hold the
KEYMAT
with your fingers and
bent the
A-COVER ASSY slightly
. Now press
the
KEYMAT
at the shown side out of the
A-
COVER ASSY
.
15.) Note the four snaps of the
UI PWB
HOLDER
.
16.) Use a slotted screwdriver and release all
four snaps by sticking carefully in the holes.
17.) Remove the
UI PWB Holder
including the
UI MODULE
from the
Engine Module
.
18.) Hold the
UI PWB HOLDER
with your fin-
gers. Press the snaps down with the tweezers
and separate the
UI MODULE
from the
UI PWB
HOLDER
at the same time.
