Figure 65 RF Controls window
• WCDMA troubleshooting
i
From Product/System Mode menu, choose "WCDMA" to Selected System Mode and click Write
ii From the Testing menu, activate the Tx Control window: Maintenance -> Testing -> WCDMA -> Tx Control .
iii In the Tx Control window:
• Select the Algorithm mode tab.
• Set Start level to “0” dBm (Default = “0”).
• Set Step size, Step count and Sequence to “0” (Default = “0”).
• Set Scrambling code class to “LONG” (Default = “LONG”).
• Set Scrambling code to “16” (Default = “16”).
• Set DPDCH Code number to “0”, Code class to “2” and Weight to “15” (Defaults).
• Set DPCCH Code number to “0”, Code class to "2" and Weight to “8” (Defaults).
• Set DPDCH enabled (Default).
• Set Channel to 9750.
RM-42
Nokia Customer Care
RF Troubleshooting and Manual Tuning Guide
Page 7–16
Company Confidential
9241872 (Issue 1)
Copyright ©2005 Nokia. All Rights Reserved.
