12. Measure the power levels with a marker.
Take the first measurement from 250 us after the trigger, the second from 750 us, third on 1225 us and
so on in every 500 us until the table is filled.
Figure 70 High burst measurement
13. In the "High Burst" pane, click Calculate.
14. Check that the calculated values are within the limits specified in the following table:
Min
Max
C0-high
-0.5
5
C1-high
-50
50
C2-high
400
900
C0-mid
-0.7
0.7
C1-mid
0
50
C2-mid
400
900
C0-low
-4
4
C1-low
-400
440
C2-low
-10000
15000
Det-k
0
800
Det-b
-1000
1000
15. To save the coefficients to the phone, click Write.
16. To close the tuning window, click Close.
17. From the Testing menu, choose WCDMA -> Tx Control.
RM-42
RF Troubleshooting and Manual Tuning Guide
Nokia Customer Care
9241872 (Issue 1)
Company Confidential
Page 7–51
Copyright ©2005 Nokia. All Rights Reserved.
