Steps
1.
Open the lock pins by spreading them outwards from the shield lid.
Figure 71 Opening the lock pins
2.
Carefully pick the shield lid up and move it to the antenna pads' direction.
3.
Bend one of the lock pins and the area around it (see the following two figures) 90 degrees up to the same
level as the shield lid. But beware that the shield itself will not bend!
Figure 72 Bending the lock pin and the area around it
RM-42
Nokia Customer Care
RF Troubleshooting and Manual Tuning Guide
Page 7–56
Company Confidential
9241872 (Issue 1)
Copyright ©2005 Nokia. All Rights Reserved.
