2. From the Tuning menu, choose WCDMA -> Tx LO Leakage.
3. Click Tune.
4. To end the tuning, click Close.
RF engine shield opening and closing instructions
Opening and closing the RF engine shield
Caution:
Because the RF shields prevent signals leaking outside and possible interference to other
devices, it is important that if the shield needs to be opened, it must be closed very carefully.
Note:
If you need to remove the RF engine shield lid, always replace it with a new one.
Context
The RF engine shield of the RM-42 transceiver is located under the SIM connector and because of that is awkward
to replace.
See the following instructions on how to open and close the shield correctly, without removing the SIM
connector.
RM-42
RF Troubleshooting and Manual Tuning Guide
Nokia Customer Care
9241872 (Issue 1)
Company Confidential
Page 7–55
Copyright ©2005 Nokia. All Rights Reserved.
