To start the test, select the Start option button.
As the WLAN monitors an active WLAN network, the Rx test results window will update and show the number
of Frames received, as well as the Packer error rate.
Monitoring the detected frames is a simple method to verify the WLAN antenna and receiver path is working
properly.
WLAN auto tuning
In case of WLAN ASIC change, RF power auto tuning is needed. Connect WLAN RF test connector to CMU200
input using proper RF cable. Start Phoenix WLAN autotune window. Check the settings and verify your PC
communicates with CMU200 via GBIP.
Auto tuning procedure
1 Open the Tuning
→
WLAN_TX_TUNING menu and click Start Power Calibration.
RM-609
BB Troubleshooting and Manual Tuning Guide
Issue 1
COMPANY CONFIDENTIAL
Page 3 – 57
Copyright © 2011 Nokia. All rights reserved.
