NOKO NOKOFORZA 2022, User Manual

36

37

BEFORE EVERY RIDE

8.1 GENERAL INSTRUCTIONS.

It’s advisable to do a general check-up of your 

NOKO

 before each outing. 

We also recommend, to regularly verify the overall conditions of your bike 

in a specialised service center.

If during the check up of your NOKO, you find out that a compo

-

nent doesn’t work correctly, please don’t use your e-bike until 

the issue is resolved. 

Prior to each ride, it’s advisable to check that the 

saddle

 is correctly tight-

ened and adjusted. Assure that the handlebar stem and the 

handlebar 

are 

steady, and properly aligned towards the front wheel. For more detailed in-

formation on how to adjust the handlebar and the saddle, review 

Chapter 6

.

Remember: always test the status and pressure of the 

tires

 of your 

NOKO.

What would you need?

 A bike pump to test the inflation pressure. 

Each tires supplier defines the suggested pressure values, which are ex

-

pressed in PSI and in bar. Generally, the pressure of a urban-type tire 

should be maintained between 2.5 and 5 bar. The minimum and maximum 

pressure values can be found on the tires itself. 

TO LEARN MORE!

 Bike tires are marked with the direction of the rotation, 

and the dimensions expressed in millimetres (i.e. 700x35) or inches (i.e. 29”). 

8.

After testing the tires pressure, check that both 

front and rear wheels

 are 

well anchored. 

Scan the QR Code

 for the video guidelines on 

nokobike.com

, or read the 

following information.

The wheels have to be well anchored to the fork and the frame; if neces-

sary, further tighten the wheel axle.

To tighten the front wheels axles, use a 6 mm hexagonal wrench; to tight-

en the rear wheel axles, use an 8 mm hexagonal wrench. 

Take  into  consideration  the  following  specification  for  NOKO  e-bikes: 

the front wheel is equipped with a thru-axle of 12 mm; the rear wheel is 

equipped with anti-rotation threaded-axle M12, of 10 mm. 

BEFORE EVERY RIDE