7
Copyright Nolan Systems Inc. 2005
info@nolan-sys.com
http://www.nolan-sys.com/
This material may not in whole or part be copied, or communicated to third parties without Nolan Systems prior agreement in
writing.
Nolan Systems – USA
1595 Cleo Springs Dr.
San Jose, Ca. 95131, USA
Tel: 408-392-0928 Fax: 408-392-0998
States Indication
Battery is full
Amber LED is off
Battery is low
Amber LED works
Headset is off
Both LEDs are off
Headset is in standby mode, ready to
make/receive calls
Blue LED flash at three-second interval
Headset is in pairing mode
Blue and Amber LED flash alternatively
LEDs also indicate certain operations
Operation Indication
Turn on the headset
LEDs quick flash 5 times
Turn off the headset
LEDs quick flash 5 times
Headset enter pairing mode
LEDs quick flash 5 times
Pairing finished
LEDs quick flash 5 times
Audio indication
Tones heared through the headset provide an audible indication of a requested action.
Beep Tone
Description of the Tone
indicates
ON
Two ascending beeps
Turn on the headset
OFF
Two descending beeps
Turn off the headset
PAIR
Three ascending beeps
Enter pairing mode
LND
Single long beep
Generate the Last number
redial function
RING
Melodious beeps
Incoming call in ongoing
MUTE
Single long beeps
Mute/un-mute the microphone
VD
Two short beeps
Voice dial enabled
CT
Single piping
Call transfer enabled
