6
Toll Free : 1-866-827-4985 model no. 052-8399-0
8. Make wire connections using wire nuts: (Fig. 8)
Between fan and receiver:
· Connect the black wire marked “L” from the fan to the black wire marked “TO MOTOR L” from
the receiver.
· Connect the blue wire marked “OSCILLATE L” from the fan to the blue wire marked “FOR
CENTER MOTOR ” from the receiver.
· Connect the white wire marked “N” from the fan to the WHITE wire marked “TO MOTOR N” from
the receiver.
Between receiver and mains:
· Connect the black live wire marked “AC IN L” from the receiver to the live wire (typically black)
from the outlet box.
· Connect the white neutral wire marked “AC IN N” from the receiver to the neutral wire (typically
white) from the outlet box.
· Connect the green ground wires from the mounting bracket and hanger ball to the ground wire
(bare or green) from the outlet box.
Fan
Fig. 8
SU
R
ON
Blue
Black
White
Ceiling Outlet
Box
Live
Wire
(Black)
Neutral
Wire
(White)
Grounding
Wire
(Green/ bare copper)
Green
Remote and Receiver Pairing
Codes are set by pushing the dip switches located on the transmitter and receiver up or
down. It is important that the code used for both the remote and receiver are identical
for the two devices to be able to communicate; otherwise the remote will not be able
to control the fan.
If you plan to install more than one fan then each fan will require the remote and receive to
use a unique code, or else one remote will be able to control more than one fan.
Black
White
