background image

CAUTION

1. Risk of fire. This product does not contain lamp shunts, so if one lamp burns out, the lights in that

circuit will not light.

Caution

do not attempt to replace bulbs or modify string.

2. The product consists of non-replaceable LED bulbs. To reduce the risk of fire or electric shock,

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

a) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.  When products

are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet.

If one is not provided, contact a qualified electrician for proper installation.

b) This seasonal-use product is not intended for permanent installation or use.

c) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

d) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

e) Do not let lamps rest on the supply cord or on any wire.

f) Unplug the product when leaving the house, when retiring for the night, or if left unattended.

g)

! To avoid risk of fire, burns, personal injury and electric shock it should

This is an electric product—not a toy

not be played with or placed where small children can reach it.

h) Do not use this product for other than its intended use.

i) Do not hang ornaments or other objects from cord, wire, or light string.
j) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.

k) Do not cover the product with cloth, paper or any material not part of the product when in use.

t) Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS

This manual contains important safety and

Use and care instructions

IMPORT

ANT S

AFETY INS

TRUCTIONS

l) Do not use an extension cord.

m) Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and

clearances from power and lighting conductors.

n) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable

codes and standards, including fire-rated construction.

o) Do not install or use within 10' (3 m) of a pool.

p) Do not use in a bathroom.

q)

WARNING:

Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI

protected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not

provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not

interfere with completely closing that receptacle cover.

r)

WARNING:

Risk of Fire. Installation involves special wiring methods to run wiring through a

building structure. Consult a qualified electrician.

s)

WARNING:

Not for use with receptacles that are weatherproof only when the receptacle is

covered (attachment plug cap not inserted and receptacle cover closed).

operating instructions for power units.

c) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire

insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.

d) When storing the product, carefully remove the product from wherever it is placed, including trees, branches,

a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live

trees in which the needles are brown or break off easily. Keep the live tree holder filled with water.

b) If the product is placed on a tree, the tree should be well secured and stable.

or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.

e) When not in use, store neatly in a cool, dry location protected from sunlight.

Reviews: