section 5: cleaning
The Stem Master should be
cleaned at the end of each
day’s use.
•
Prepare a bowl of soapy water
and have absorbent material
available
•
Turn the Stem Master upside
down and unscrew the bottle
by turning it in a clockwise
direction. Place the Stem
Master safely to one side
•
Decant any unused herbicide
back into the original
container and place the Stem
Master bottle safely to one
side
•
Remove the handle grip by
twisting it in a clockwise
direction and pulling it down
to release
•
Immerse the Stem Master
in soapy water, without the
bottle and the handle grip
attached
•
Whilst the Stem Master is in
the water, squeeze the trigger
several times
•
Triple rinse the bottle and
clean the handle grip
•
Allow the bottle, handle grip
and Stem Master to dry
•
Once the Stem Master,
handle grip and bottle are
dry, reattach the handle grip
by pushing it onto the piston
assembly and secure in an
anti-clockwise direction
•
Reattach the bottle by firmly
holding the Stem Master and
turning the bottle in an anti-
clockwise direction.
10
