Section 4: Controls and Features (cont.)
•
Clock:
o
The clock enables you
to measure the hours of
operation
o
To display the hours of
operation, set the spray
width and pacing controls
to ‘OFF’
o
Hours will show on the LCD
readout for approximately 3
seconds
o
The clock is activated when
the spray button is pressed
o
‘SER’ will appear when a
service is due
Onboard electronics
•
The onboard processor is
activated when the trigger is
pressed and monitors:
o
Battery condition
o
Valve operation
o
Spray width control
o
Pacer control
o
Usage time.
Flow rate
•
Eight settings (A-G and
Prime) on the flow rate control
regulate the chemical flow.
•
The flow rate window shows
the chemical flowing to the
spray head.
•
Always refer to the herbicide
label for the correct flow rate
setting.
12
