6
NookBox
Installation Guide
Remote Keypad KP-35
Beep Control:
-
Entry/Exit Beep:
Set to “Turn On” or “Turn Off” this function to program whether the Keypad should emit warning beeps during Entry
Delay or Exit Delay timer.
-
Alarm Beep:
Set to “Turn On” or “Turn Off” this function to program whether the Keypad should emit warning beeps when an alarm is
activated
Panic Alarm:
Select to enable or disabled the dual key panic alarm function.
Fire Alarm:
Select to enable or disabled the dual key fire alarm function.
Medical Alarm:
Select to enable or disabled the dual key medical alarm function.
Quick Arm:
Select to enable the quick arm function. When enabled, the user can directly enter Away Arm or Home Arm mode without entering user
PIN code.
Press key to exit User Menu.
Mode Change Function
•
After entering the PIN code, press Arm key to enter “Away Armed” mode. “Away Armed” will be displayed on the LCD screen
along with long beeping sound indicating successful operation.
•
After entering the PIN code, press Home Arm key to enter “Home Armed” mode. “Home Armed” will be displayed on the LCD
screen along with 3 beeps indicating successful operation.
• After entering the PIN code, press OK key to enter “System Disarmed” mode. “System Disarmed” will be displayed on the LCD
screen along with 2 beeps indicating successful operation.
•
“Counting Down” will be displayed on the LCD screen along with 1 beep every second when the system begins to countdown Exit/
Entry Delay.
•
“Operation Error” will be displayed on the LCD screen along with 2 beeps indicating unsuccessful operation.
•
“Fault Display” will be displayed on the LCD screen along with 3 beeps indicating arming fault.
•
“Incorrect PIN Code” will be displayed on the LCD screen along with 4 beeps indicating incorrect password submission.
NOTE:
•
After 30 seconds without receiving any signal from the Control Panel, the power goes off and it returns to Stand-by mode.
• If submitting incorrect PIN Code for 5 times within 10 minutes, the Remote Keypad will be automatically locked up for 5 minutes. During
this period, any operation will be invalid. When the lockup time expires, the Remote Keypad will sound 1 long beep.
Dual Key Alarm Function
•
The dual key alarm function allows user to activate alarm by pressing and holding two keys on the Keypad for 3 seconds. The functions
maybe enabled or disabled using Keypad menu and are disabled by default. The user must first activate them in User Menu to use these
features.
•
Panic Alarm: Press Button 1 + 3 to trigger a Panic Alarm.
•
Fire Alarm: Press Button 4 + 6 to trigger a Fire Alarm.
•
Medical Alarm: Press Button 7 + 9 to trigger a Medical Alarm.
Fault Conditions
•
If the Control Panel is under “Armed Mode”, you CANNOT activate Home mode by using Remote keypad. If you do so, the Remote Key
pad will sound 2 beeps indicating the Control Panel is under Arm Mode.
•
Press 4-digit PIN Code followed by Arm key or Home Arm to change mode. If there is a fault, then Remote keypad will beep 3 times. The
Yellow LED will light up when any fault situation is detected.
•
If submitting incorrect PIN Code for 5 times within 10 minutes, the Remote Keypad will be automatically locked up for 5 minutes. During
this period, any operation will be invalid. When the lockup time expires, the Remote Keypad will sound 1 long beep.
