3
3 Operator
Safety
**************** DANGER ****************
1.
Always ensure that the UC4 system is powered down or
in Manual Mode:
•
before leaving the operator’s seat;
•
while the machine is not moving;
•
or when transporting the machine;
2.
Under no circumstances should any service work be
performed on the machinery while the UC4 system is in
the Automatic Mode.
3.
Before working on any part of the booms the following
action must be taken:
•
set the UC4 system to Manual Mode using the
AUTO/MAN switch;
•
turn the sprayer’s engine off.
4.
Do not operate this machine before:
•
reading & understanding the operator's manual;
•
gaining a thorough understanding of how to
conduct machine operations.
5.
To show technical details of the machine some figures in
this manual may show safety shields removed. Never
operate this machine with any safety devices removed or
disconnected.
6.
The UC4 system will greatly improve your spraying
height accuracy and protect the boom against damage in
a wide variety of field conditions.
Under some circumstances performance may be limited.
The OPERATOR of the sprayer must remain ALERT at
all times and override the automatic control when
necessary. Refer to the warranty statement in Section 9
for more details.
Summary of Contents for UC4 Total Control
Page 36: ...34 ...
Page 58: ...NOTES ...
