background image

1. Installation Figure

Please insert a SIM Card to the GPS Tracker, and connect it to OBD II

interface of the Vehicle directly. Please check the device status through LED

light after power on:

LED indicates Power, it should be on when the vehicle is started.

LED indicates status of Signals.

Flashing per one second which indicates GSM registers successfully.

Flashing per three seconds once which indicates GPS is obtaining

orientation

It is still on which indicates GSM has registered and GPS has

obtained the orientation. It’s working well.

If it is on for 0.1 second then off for 0.1 second more than 3 minutes,

please make sure SIM card inserted well. Without SIM card, the device cannot

work.

2. SMS Operation Instruction

SMS Format: A******,cmd,param1,param2…
1. ******is the password, Initial Password is 000000
2. cmd is the command ID.
3. Param is the command parameter. Different cmd use different
parameters. All the parameters must use half-angle symbol. Wrong
SMS format or wrong password, it will not respond.

2.1 Location Enquiry (000)

Message format: A******,000
e.g. A000000,000
Reply:

http://maps.google.com/maps?q=22.54079,113.93923

09-10-20 17:38:30 Speed:20

You will open the website to Enquiry on google Map directly.

Summary of Contents for NR100






Reviews: