55
EN
protective equipment.
Fragments of workpiece or of a broken
accessory may fly away and cause injury beyond immediate
area of operation.
10.
Never lay the power tool down until the accessory has come
to a complete stop.
The spinning accessory may grab the
surface and pull the power tool out of your control.
11.
Do not run the power tool while carrying it at your side.
Accidental contact with the spinning accessory could snag
your clothing, pulling the accessory into your body.
12.
Regularly clean the power tool's air vents.
The motor's fan will
draw the dust inside the housing and excessive accumulation
of powdered metal may cause electrical hazards.
13.
Do not operate the power tool near flammable materials.
Sparks could ignite these materials.
14.
Do not use accessories that require liquid coolants.
Using
water or other liquid coolants may result in electrocution or
shock.
Kickback and related warnings
1.
Maintain a firm grip on the power tool and position your
body and arm to allow you to resist kickback forces.
Always
use auxiliary handle, if provided, for maximum control over
kickback or torque reaction during start-up.
The operator
can control torque reactions or kickback forces, if proper
precautions are taken.
2.
Never place your hand near the rotating accessory.
Accessory
may kickback over your hand.
3.
Do not position your body in the area where power tool
will move if kickback occurs.
Kickback will propel the tool in
direction opposite to the wheel's movement at the point of
snagging.
4.
Use special care when working corners, sharp edges etc.
Avoid bouncing and snagging the accessory.
Corners, sharp
edges or bouncing have a tendency to snag the rotating
accessory and cause loss of control or kickback.
5.
Do not attach a saw chain woodcarving blade or toothed
saw blade.
Such blades create frequent kickback and loss of
control.
Safety warnings specific for polishing operations
1.
Do not allow any loose portion of the polishing bonnet or its
attachment strings to spin freely. Tuck away or trim any loose
attachment strings.
Loose and spinning attachment strings
can entangle your fingers or snag on the workpiece.
Specific safety rules
1. Wear ear protectors. Exposure to noise can cause hearing
