Noraxon U.S.A., Inc.
myoMOTION Data Logger
P-6828 Rev A (Oct 2014)
17
Storage
and
Protecting
Between
Usages
For extended storage or when travelling:
Put the myoMOTION sensors into shutdown mode
*
Place all sensors into the sensor charging station
Turn Data Logger off
Position all components inside the system travelling case according to their prepared
cavities
*
A special setting in the companion user software activates sensor shutdown mode. (See section
6) To access the shutdown mode in MR3:
Click on the
Home
Button in the top navigation bar
Click on the
Setup
Button in the upper right corner of the screen
Click on the
Configure Device
Button at bottom right corner of the Hardware Setup box
Click on the
Shutdown Sensors
Button at bottom of the Settings box.
When the sensors are shutdown they will stop blinking completely. The sensors are reactivated
by briefly charging them.
