FEATURES
l
The keyboard , mouse and 15” LCD monitor was built-in on KVM switch .
l
Standalone machine controls up to 4/8/16 sets of PCs .
l
Cascade controls 64/128/25 sets of PCs .
l
Through OSD , you can use the hot key , mouse clicking and push button on front panel to to switch PCs .
l
Fully supports Logitech/Microsoft/IBM PS/2 mouse/trackball and compatible PS/2 mouse/trackball .
l
Supports resolution of 1024x768,75Hz and independently supports EDID & DDC2 of each PC .
l
Each Port on the panel of the KVM has independent push Buttons and LED lamps for easy
switch and identification .
l
Complies with the height of the IU chassis specification And installable with a hanging stand
Into a 19” chassis system
l
Requires no additional software of hardware.
l
Supports hot plug ; not necessary to turn off the original system regardless of a newly
installed
PC or KVM .
EQUIPMENT REQUIREMENTS
Computer System
l
A Supported VGA , SVGA , XGA , SXGA or Multisync Video Card .
l
A PS/2 (mini-DIN 6Pin) Mouse port .
l
A PS/2 (mini-DIN 6Pin) or AT (5-Pin DIN) with AT-to-PS/2 Adaptor Keyboard port .
Cable
l
3-in-1 KVM Cable ; please contact your local distributor for detailed specification and length
Connected to CPU port of KVM Connected to Console port of PC or Slave KVM
