CONFIGURATION
KVM -1508 Front View
3
1 & 2
KVM -1516 Front View
1 & 2 3
1.
Port Selection Switches
Press the push button to directly switch to the corresponding PC .
l
In the cascade architecture , if the port is connected to KVM but not PC , then the push button will not
respond .
l
Simultaneously press Puch Buttons 1 and 2 to directly enter the OSD Control Mode .
l
Simultaneously press Push Buttons 3 and 4 (KVM-1504) ,Push Buttons 7 and 8 (KVM -1508) , Push
Buttons 15 and 16 (KVM-15166) to open “Console-Reconfirmed”, and the keyboard and mouse will be
reconnected , and the EDID in the screen will be read again .
2.
Port LEDs
These Port LEDs are built in the Port Selection Switches .
Online : A green light indicates that the PC or KVM connected to the corresponding port is on and operating .
Selected : A red light indicates the situation of being connected to the port .
l
If a port is connected to KVM , then the red light of that port will not on .
l
Besides the special mode , the whole system architecture Only has one red light (indicating
that the Console is Connecting to the PC) or has no red light (when powering On the KVM for the first time .)
3.
Power LED
An blue light indicates that the KVM is operating .