Owner’s Manual 8
The ice maker is fully automatic and will operate in ambient temperatures above freezing (32°F).
When the freezer temperature of the refrigerator is low enough, the ice maker opens the water solenoid valve and fills the mold. The
ice maker ejects the ice into a storage bin. As the storage bin fills, the ice raises the shut-off arm until it turns off the ice maker. As
you use the ice and lower the ice level in the storage bin, the shut-off arm also lowers. This turns the ice maker ON and begins the
process of making ice.
The ice maker operates on:
- Cold potable water at a pressure of 15 psi – 125 psi.
- 120 Volts AC (108 VAC min. – 132 VAC max.).
Ice maker operation:
1. Make sure the ice maker AC power cord is plugged into a receptacle.
2. Open the water shut off valve of the vehicle.
Make sure that the ice maker arm can move freely and does not touch the
frozen foods in the freezer.
3. Push the ice maker arm down to the ON position [60] (See Art02784)
If you operate the refrigerator without connecting the water supply line
and/or opening the water shut off valve of the vehicle, make sure the ice
maker arm is up in the OFF position.
4. Allow the freezer to cool enough and ice production wll begin to fill the
storage bin [61].
New plumbing connections and/or impurities in the water supply line
after witnterizing can cause the first ice to be discolored or have an odd flavor.
5.
To stop the ice maker, push the ice maker arm up to the OFF position [62].
Your refrigerator will give you years of trouble free service if you do these simple checks every three to six months:
- Keep the food compartment and the freezer clean. See “Cleaning”.
- Defrost the refrigerator as necessary. See “Defrosting”.
- Make sure the door seals correctly. See “Door Sealing“.
- Be aware of any cooling changes that are not because of weather, loading, or thermostat changes. If changes occur, contact your
dealer or an authorized Norcold Service Center.
- Make sure the air flow in, under the refrigerator, through the refrigerator condenser and coils and out the top vent is not
blocked or decreased.
- Make sure the area behind the refrigerator is clear. Do not use the area behind the refrigerator for storage of anything, especially
combustible materials, especially gasoline and other flammable vapors and liquids.
Defrosting:
The freezer walls of the refrigerator operate at below freezing temperature and will naturally form frost from humidity, which is
always present in the air. The humidity inside the refrigerator increases:
- with higher outside temperature and humidity.
NOTICE
CAUTION
!
Ice Maker
Refrigerator Care Checklist
NOTICE
60
61
62
ART 02784
