5 Parameters
BU 0500 EN-1516
151
P704
[-01]
...
[-05]
Volt. last error
(Last voltage error 1...5)
S
0 ... 600 V AC
This parameter stores the output voltage that was being delivered at the time the fault occurred.
The values of the last 5 errors are stored.
The SimpleBox / ControlBox must be used to select the corresponding memory location 1...5-
(Array parameter), and confirmed using the OK / ENTER key to read the stored error code.
Pos: 382 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P705 – Zwischenkreisspannung letzte Störung 1...5 @ 0\mod_1328170720639_388.docx @ 12433 @ @ 1
P705
[-01]
...
[-05]
Last link circuit error
(
Last link circuit error 1...5)
S
0 ... 1000 V DC
This parameter stores the link voltage that was being delivered at the time the error occurred. The
values of the last 5 errors are stored.
The SimpleBox / ControlBox must be used to select the corresponding memory location 1...5-
(Array parameter), and confirmed using the OK / ENTER key to read the stored error code.
Pos: 383 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P706 – Parametersatz letzte Störung 1...5 @ 0\mod_1328170810570_388.docx @ 12456 @ @ 1
P706
[-01]
...
[-05]
P set last error
(Parameter set, last error 1…
5)
S
0 ... 3
This parameter stores the parameter set code that was active when the error occurred. Data for
the previous 5 faults are stored.
The SimpleBox / ControlBox must be used to select the corresponding memory location 1...5-
(Array parameter), and confirmed using the OK / ENTER key to read the stored error code.
Pos: 384 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P707 – Software-Version/-Revision @ 0\mod_1328171743458_388.docx @ 12479 @ @ 1
P707
[-01]
...
[-03]
Software-Version
(Software version/ revision)
0.0 ... 9999.9
This parameter shows the software and revision
numbers in the FI. This can be significant when
different FIs are assigned the same settings.
Array 03 provides information about any special
versions of the hardware or software A zero
stands for the standard version.
... ... [-01] =
Version number (Vx.x)
... ... [-02] =
Revision number (Rx)
... ... [-03]
= Special version of
hardware/software (0.0)
Pos: 385 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P708 – Zustand Digitaleingänge @ 0\mod_1328172117162_388.docx @ 12502 @ @ 1
Summary of Contents for BU 0500
Page 1: ...EN BU 0500 SK 500E Users Manual for Frequency Inverters ...
Page 211: ......
Page 212: ...6075002 3021 ...