NORDAC SK 750E Manual
150
BU 0750 GB
10.6 Recommendations for service and maintenance
NORDAC SK 750E frequency inverters do not need any maintenance when operated according to instructions.
To keep the device in perfect condition, the information provided in Section 9.1 'General data' should be taken
into account as well.
If the frequency inverter is operated in an environment where the air ist dust-laden, the cooling surface must be
regularly cleaned with compressed air. Likewise any air inlet filters in the switch cabinet must be cleaned or re-
placed at regular intervals.
In the event of any inquiries with our technical support department kindly have the following ready: the exact
type of the device (shown on the type plate/in the display) and that of the options and accessories, if any, the
software version being used (activate P707) and the serial number (type plate).
Repair
If a repair is necessary, please send the device to
your local NORD distribution agency.
Any information required concerning repair should be obtained from
your local NORD distribution agency.
If a frequency inverter is sent to the manufacturer for repair, no guarantee can be assumed for attachments
such as line cables, potentiometers, external displays, etc.!
Kindly remove from the inverter all parts which are not genuine.
Information on the Internet
The comprehensive manual with detailed information in German or English is also made available on our
Internet site:
It goes without saying that if you would prefer copies of this manual to be sent to you by your local NORD dis-
tribution agency, they will gladly comply with your request.
