5.8
Information
BU 0500 GB
Subject to technical alterations
117
Parameter
Set value / Description / Note
Device
Supervisor
Parameter
set
P723
Actual voltage components Ud
0 ... 500 V
Displays the actual field voltage component.
P724
Actual voltage components Uq
0 ... 500 V
Displays the actual torque voltage component.
P725
Actual cos
ϕ?
0.00 ... 1.00
Displays the actual calculated cos
ϕ
of the drive.
P726 Apparent
power
0.00 ... 99.99 kVA
Displays the actual calculated apparent power. Basis for calculation are the motor data
P201...P209 ... .
P727 Mechanic
power
-99.99 ... 99.99 kW
Displays the actual calculated effective power of the motor. Basis for calculation are the motor
data P201...P209 ... .
P728 Mains
voltage
0 ... 1,000 V
Displays the actual mains voltage at the FI input.
P729 Torque
0 ... 400 %
Displays the actual calculated torque. Basis for calculation are the motor data P201...P209 ... .
P730 Field
0 ... 400 %
Displays the actual field in the motor as calculated by the inverter. Basis for calculation are the
motor data P201...P209 ... .
P731
Current parameter set
Shows the actual operating parameter set.
0 ... 3
0 =
Parameter set 1
1 =
Parameter set 2
2 =
Parameter set 3
3 =
Parameter set 4
P732
U phase current
S
0.0 ... 999.9 A
Displays the actual U phase current.
NOTE:
This value can deviate somewhat from the value in P719, due to the measurement
procedure used, even with symmetrical output currents.
P733
V phase current
S
0.0 ... 999.9 A
Displays the actual V phase current.
NOTE:
This value can deviate somewhat from the value in P719, due to the measurement
procedure used, even with symmetrical output currents.
