3.2
Technology unit overview
BU 0500 GB
Subject to technical alterations
49
Menu structure with the SimpleBox
P 0 - -
_ _ _ _
P 1 - -
P 2 - -
P 4 - -
P 5 - -
P 6 - -
P 7 - -
P 0 0 1
P 0 0 2
P 1 0 0
P 1 0 1
P 1 1 4
P 2 0 0
P 2 0 1
P 2 2 0
P 4 0 0
P 4 0 1
P 4 8 3
Operating values
display (or operational)
following mains ON
P 3 - -
P 3 0 0
P 3 0 1
P 3 2 7
P 0 0 3
To
change a parameter value
, the ENTER key
must be pressed when the applicable parameter number
is displayed.
Changes can then be made using the VALUE keys
or
and must be confirmed with
to save them
and leave the parameter.
As long as a changed value has not been confirmed by pressing ENTER, the value display will flash; this value
has not yet been stored in the frequency inverter.
During parameter changes, the display does not blink so that the display is more legible.
If a change is not to be saved, the "DIRECTION" key
can be pressed to leave the parameter.
Accept changed values
Value to factory setting
Increase value
Reduce the value
Do not save
changed value
Parameter set display
