20 of 44
NAC-S20-15 Active Compensation Unit - User Manual – Ver. 1.0
4.3.
Configure “Is moving”
Is moving is a state flag that is low when the tool actuator is moving and high when
standing still. You can configure a timeout timer and distance threshold to filter the signal.
Figure 19
Step 1
Set timeout value.
Note:
The “Timeout” corresponds to the time before the actuator starts moving (the “is
moving” signal is set to high).
Step 2
Set distance threshold. The distance threshold corresponds to how far the actuator needs
to move before the is moving signal goes low.
Step 3
Navigate to the bottom of the configuration page and click “Save”.