APPLIANCE
Rev. 01 of 01/07/2019
Translation of the original instructions in Italian
SOLL.
7.9
“Cell cycles” menu
IMPORTANT!
Any important information for optimal cycle operation is displayed via
pop-up.
To access the Cell cycles menu, press the respective key on the “HOME” screen (see para.
7.5 “HOME” screen).
This menu consists of a series of preset cycles, which can all be edited according to the user’s
needs.
“Cell cycles” menu Fig. 7.12
7.9.1
Information on the cell cycles
Below is a list of useful information concerning the cycles:
The cell cycles are automatic and feature no “advanced” settings.
During the drying cycle, the door of the appliance must remain open resting on the
special support hook, otherwise the user will be informed by means of an acoustic
and visual warning on the panel.
If the appliance does not require a defrost cycle, the user will be informed by
means of a message on the panel.
The defrost and cell sanitisation cycles do not allow for the parameters to be
edited by the user.
77
