Assembly Instructions
N.º
467_SERIE_MWZ_
AUFBAUANLEITUN
G_2009-03
467_SERIE_MWZ_AUFBAUANLEITUNG_2009-03
14/59
TEC
INDEX
N
OTES
We would like to thank your preference for our equipment, which follow all the European Directives and Standards and will meet
for sure, your expectations and satisfy your needs.
Thank you
1
Reception
On receiving the equipment, check carefully that the packaging is intact and has not been damaged in transit.
After unpacking, check that you have all the components and if the characteristics correspond to those on the order
form.
Installation, maintenance and other work should be carried out by specialised and authorised technicians. The
manufacturer accepts no responsibility and will not cover the guarantee if these conditions are not respected.
This appliance must be used according to these instructions and only for the manufacturer’s purpose. The incorrect use of the
equipment can cause damages to the equipment and to users.
As a result of our constant effort to make technological improvements, the specifications indicated here are subject to change
without warning.
2
Identification Plate
Our models have a plate in the interior of the door panel, in the superior left edge on which the main data can be found. The
MODEL and SERIES are absolutely essential when consulting the manufacturer.
The European directive on Waste from Electrical and Electronic Equipment (WEEE) specifies that, at the end of its life
cycle, the equipment and all of its components, subassemblies and consumable materials should be sent separately
for treatment for it to be destroyed, recycled or reused.
Do not put equipment with this symbol together with unseparated urban waste.
Legend
a) Voltage (V)
b) Frequency (Hz)
c) Current (A)
d) Power (W)
e) Refrigeration gas
(ASHRAE)
f) Gas capacity (g)
