12
5
INSTALLATION AND FIRST USE
After having unpacked the unit, remove the metallic base supports.
Please note: be very careful because while removing the metallic base supports the unit could be
temporarily unstable. Do not let unauthorized people or no properly protected operators move in
the unit proximity.
In case the unit has to be relocated, fix again the metallic supports.
Place the unit in its ultimate location and stabilize it by setting the four adjusting feet in order to
guarantee a proper stability and functionality.
This operation is crucial in order to guarantee a proper performance of front glass door when
provided.
Be sure that the electrical system of the place where the unit has to be installed complies with the
regulations and the safety codes in force.
Make sure the power supply of the unit is indipendent from other
supplies and properly protected.
According to IEC EN 60335-2-49 par. 27.2 a terminal for the connection of an external equipotential
conductor is provided.
