4
2.
3.
4.
5.
9.
6.
7.
8.
10.
11.
1.
1.
15.
16.
17.
1.
2.
3.
4.
5.
6.
7.
8.
10.
9.
[BLN-005, BLN-007]
[BLN-006]
Product information
1. Blender filler cap
2. Blender lid
3. Plastic carafe
4. Stainless steel blender blade
5. Pulse switch
6. Blender tamper tool
7. Rubber insulator and stabilizer
8. Power switch
9. Blender base
10. Speed buttons: High, medium, low [BLN-006]
Variable speed dial [BLN-005, BLN-007]
11. Timer buttons: 35, 60 and 90 seconds [BLN-006]
For your safety
This machine is equipped with an automatic thermal cutoff and
overcurrent protector.
If the blender shuts off because of overheating, press the reset
button on the bottom of the machine.
Preparation
1. Make sure the mains voltage matches the label on the
product.
2. Make sure all the switches are ‘OFF’ or ‘O’.
3. Put the machine on a firm level surface and plug into the
mains power.
4. Ensure that the blender carafe, blender lid, blender filler cap
and tamper are clean and prepare your ingredients before you
start the machine.
5. Large ingredients should be sliced or broken into chunks
before being placed in the carafe for better blending results.
6. Remove the carafe from the blender base.
7. Remove the lid from the carafe.
Placing the ingredients
1. Place the soft ingredients and liquids in the bottom, then
place the hard ingredients and ice on top.
2. Depending on what you are going to make: In general we
recommend that you also add a liquid such as water or milk.
Fill with liquid until the carafe is 2/3 full.
3. Put the lid and filler cap on the blender carafe. After the filler
cap is placed it be should rotated into place, so it fits well.
4. Put the carafe onto the blender base.
Usage instructions
1. When blending, always keep a safe distance between your
body and the machine, at least 20 cm.
2. Put the power switch to "ON" or "I".
3. Set the speed with the:
Variable speed dial [BLN-005, BLN-007].
Buttons low, medium, high [BLN-006].
Tips: For most type of ingredients the blender should be
started on a low speed then changed to a higher speed. If the
ingredients are getting stuck you can try using pulse a few
times. You can also use the tamper tool, Please see the tamper
section.
4. After blending turn the machine off with the power switch.
Speed selection advice
Low speeds: Suitable for soft foods, such as vegetables and
fruits.
Medium speeds: Suitable for rigid food types, such as carrots
and celery.
High speeds and pulse: Suitable for harder food types, such as
coffee beans and ice.
If the machine is used on high speed for 5 minutes, you must
let it rest for at least 1 minute before using it again.
Because of the high speed of this machine, it creates friction
heat. The ingredients and contents of the carafe will rise in
temperature while being blended.
Automatic timer [BLN-006]
Press one of the buttons: 35 seconds, 60 seconds or 90
seconds to enable the automatic timer. The machine
automatically selects speed, and the speed changes during
blending. When the timer is done, the machine automatically
stops.
After blending turn the machine off with the power switch.
EN
User Manual
