GB
3. Install the rear-view mirror
Open the door, install the inverted mirror (part 4) in the specified position, and tighten the inverted
mirror with screws (part 18) as shown.
Plug the wire plug of the steering wheel into the
wire plug from the car body hole correspondingly,
and then put the connected plugs into the car
body hole.
Install the steering wheel (part 3) on the J-shaped
iron hook, and tighten with the steering wheel
screw (part 15) and the steering wheel anti-loose
nut (part 20); then insert the handle (part 5) into
the designated position and press down firmly to
make it reliably connected.
5. Installation of power supply
Insert plug into the circuit board to its bottom.
4. Installation of steering wheel and hand shank
Car body
hole
Plug-in
Battery
black-plug(-)
Black cable
Battery
red-plug (+)
Red cable
Over - current
protection
Circuit board
placing box