8
If there are still gas leaks after repeated attempts, contact your dealer.
7
IF BUBBLES APPEAR, SWITCH OFF THE GAS SUPPLY AND REPAIR THE
PROBLEM. PERFORM A NEW LEAK TEST. DO NOT USE THE GRILL BEFORE YOU
ARE SURE THAT THERE ARE NO LEAKS.
6
Open the gas tap on the regulator and carefully check for bubbles
appearing anywherethe liquid has been applied.
1
Make a mixed solution
(½ water and ½ liquid detergent / soap).
2
Ensure that there are no naked flames,
heat sources and cigarettes in the vicinity
when performing a leak test.
3
Check that all controls on the grill are in the
”OFF” position.
4
Set the regulator to the ”OFF” position and connect it
to the gas bottle.
5
Apply the liquid to all joints and connections on the gas bottle,
regulator, the entire hose and all valves on the grill.
ALL JOINTS AND CONNECTIONS MUST NOW BE
LEAK TESTED BEFORE USING THE GRILL.
Leak test annually, and whenever the gas bottle is removed or replaced.
Always perform a leak test in a well-ventilated area.
!
NB!
NEVER USE AN OPEN
FLAME TO PERFORM
A GAS LEAK TEST
IMPORTANT! GAS LEAK TEST
!
16
