7
.
Step 5:
Insert the bottom shelf (11) into the long leg (8) ends. the bent tip goes into the hole of the
long leg first, then align and insert the other end into the wheel legs(9) . then attach the air vent
to the fire bowl(5) with the screws, washers and nut(A).
Step 4:
Align the leg base tube(7) hole and charcoal support( 6 ) hole to the fire bowl(5) holes, attach
them using screws, washers and nuts (A). Do not tighten. finger out the screws and washers(B)on
the leg tube, then attach long leg( 8) into the leg base tube(7), turn back the screws and
washers(B) with fingers. FIRE BOWL HANDLE SHOUDLE BE LOCATED ON THE LONG LEG.
Follow the same step for the wheel legs( 9 ).
1pcs
A
A
.
M6x12
16
10
A
10
11
A.
M6x12
1PCS
6
7
9
B
A
B.
M6x30
3PCS
8
A.
M6x12
6PCS
