P. 6
User Guide
Secure Lock Option
Before it can remote-start your vehicle, the module must first disarm the factory security
system.
The secure lock feature may be required on certain vehicle models with factory security
systems that automatically unlock the doors when the security system is disarmed.
To keep your vehicle protected when the factory security system is disarmed for a remote
start, secure lock will relock your doors as soon as the vehicle has started.
Once the engine run cycle ends, secure lock will rearm your factory security system.
Remote Trunk Release Option
If your system was installed with the remote trunk release, you can open your trunk by
pressing the
TRUNK
button on the remote transmitter. Vehicles must have an electric
TRUNK
switch or a remote
TRUNK
button on the vehicle’s OEM transmitter for this option to be
compatible with the module.
Engine Run Time
(
Gas 15 minutes, Diesel 20 minutes by default
) If you have a gas engine, your system can
be programmed to run the engine for 4, 15, or 25 minutes (15 minutes by default). If you
have a diesel engine, it can be programmed to run the engine for 9, 20, or 30 minutes).
Starter Kill / Anti-Grind
This added security feature will immobilize your vehicle when the system is armed
(LOCKED). If your module was installed with the starter kill option, you will not be able to
start your vehicle with the key unless the system has been disarmed first (UNLOCKED).
The starter kill option can be programmed to be
active
(will not arm automatically) or passive
(will arm automatically). In
passive
mode, your installer can program it to arm automatically
in 1 or 3 minutes.
Once the vehicle has been remote started, the anti-grind feature prevents the starter motor
from re-engaging when the ignition key is accidentally turned to the
CRANK
position.
Note:
Automobile insurance companies sometimes offer a rebate for vehicles with a
passive starter kill device.
Multi-car Operation
This option allows the owner of two vehicles, both equipped with the same Remote Car
Starter model, to control both systems with a single remote control. To control the second
vehicle, simultaneously press the
TRUNK
button and the button of the function you wish to use.
Note:
Your remote control must be configured for second car operation by the installer.
•
Press
TRUNK
+
LOCK
button simultaneously:
LOCK
•
Press
TRUNK
+
UNLOCK
: ...............................
UNLOCK
•
Press
TRUNK
+
START
:..................................
START
•
Press
TRUNK
+
STOP
: ...................................
STOP
•
Press
TRUNK
+
LOCK
+
UNLOCK
: ....................
AUX 3 (TRUNK)
•
Press
TRUNK
+
STARTSTOP
for 3 sec:............
Cold Weather Mode
