•
SAFE START (Child Safety Mode)
-
OFF by default. When programmed this feature will require
that the user press the START button on the remote
transmitter TWICE within 3 sec to start the vehicle. This
eliminates accidental remote starts, e.g., if a child is playing
with the transmitter.
•
REMOTE START RUN TIME
-
The NS-3003 can be programmed to run the engine for
5, 15
or 25
minutes in Gas mode, and
10, 20 or 30
minutes, in
Diesel mode. The default run time is 15 minutes in Gas mode
and 20 minutes in Diesel mode.
•
IDLE MODE
-
On by default, this great standard feature lets you remove the
keys and let the vehicle idle for the pre-programmed run time.
To enable idle mode simply press the START button on the
transmitter with the engine running, and then remove the key
(the vehicle will continue to run).
•
HOME VALET MODE
-
OFF by default. This amazing safety feature allows you to
remotely place the system into a no-start mode, so if the
vehicle is parked indoors there is no danger of starting on it’s
own. To activate Garage Valet Mode the user has simply to
press on the LOCK button and within 3 seconds press on the
STOP button.
Once activated the vehicle will not start by
remote until the key is turned to the ignition position.
•
AUX 2 – REMOTE OR TIME-CONTROLLED OUTPUT
-
The AUX 2 output can be used for many different
applications. The output can be programmed to give
continuous 1second, when remote LOCK & START
are pressed simultaneously. It can also be toggled ON and
OFF with a 30 second timeout, or toggle ON and OFF with a
60 second timeout. This feature can be used to control a
siren(PANIC MODE) or to turn on the headlights
(HEADLIGHT ILLUMINATION) the timer can also roll up
the windows on some vehicles without any external window
module. (Volks, BMW, ect.)
AUX 2 OUTPUT
The auxiliary 2 output, can be used for many different applications.
The output can be programmed to give continuous output, when
remote Lock & Unlock are pressed simultaneously. (Buttons 1 & 2)
Or it can be toggled ON and OFF with a 30second timeout, or toggled
ON & OFF with a 60 second timeout.
This means that when the buttons are pressed AUX 2 will output
ground for 30 or 60 seconds or until the buttons are pressed again to
shut off the output.
This output can be used as PANIC MODE, HEADLIGHT
ILLUMINATION, REMOTE DOMELIGHT SUPERVISION. Or the
timer can also roll up the windows on some vehicles without any
external window module. (Volks, BMW, ect.)
AUX 3 – TRUNK OR TIMED OUTPUT
The auxiliary 3 output, can also be used for many different
applications.
The most common use for AUX 3 is trunk release, and by pressing the
TRUNK button for 1sec. the system will pop the vehicles electric
trunk. (If installed)
The output can be also programmed to give a continuous output for as
long as channel 3 is held pressed. (For Sun roof or Window close)
HOME VALET
Home-Valet is an amazing safety feature that will allow you to
remotely place the system into a NO-START mode, so if the vehicle is
parked indoors there is no danger of the vehicle starting on it’s own.
In Home-Valet mode the remote start capability on the NS-3003 is
completely de-activated, you CANNOT start the vehicle by remote
,
unless the system is removed from Home-Valet Mode. Therefore you
can rest assured that your vehicle won’t be running in your garage
accidentally.
The activation of Garage Valet Mode is just a couple of transmitter
clicks away. To activate, simply press on the LOCK button and
within 3 seconds press on the START button.
NOTE:
Once activated the vehicle will not start by remote until the key is
turned to the ignition position.
2
7
