14
HOW TO ADJUST THE MAT ALIGNMENT AND TENSION
The alignment and tension of the platform mat (walking surface) has been set prior to shipping.
Should improper tracking of platform mat occur (walking surface moving too far to right or left on
platform) or if you find that the mat slips when you get on, these problems can be corrected as
follows:
1. Locate the adjustment screws on the end of the main frame.
2. If your mat tends to walk to the right, then the adjustment of the right screw is necessary
by turning clockwise.
We recommend adjustments of 1/2 turn at a time, with a test to follow.
If your mat continues to walk to the right, simply adjust the left adjustment screw, by turning
1
/2 turn counterclockwise.
3. If your mat tends to walk to the left, turn the right adjustment screw counterclockwise.
If the mat continues to walk to the left, simply adjust the left adjustment screw clockwise.
4. If your mat appears to be loose, simply tighten both screws.
If it appears tight, simply loosen both screws.
5. If it still appears tight, spray lightly the surface of the frame board with silicone between the
board and mat.
This procedure may be repeated as necessary.
6. During transportation, the mat may have shifted to one side.
Carefully tip the unit to one side and check to see that the walking mat is resting on the two
guide hooks welded under the frame.
If you find that the mat has indeed shifted, simply pull the mat toward the center of the unit, lift
up on the mat, and reposition it so that it is once again resting on the guide hooks.
NOTE: If one of your legs is weaker than the other, the treadmill mat may tend to track to that
side because of the extra pressure exerted by your stronger leg. If this occurs then either
dismount treadmill and allow mat to track back to middle, or exert pressure to side of mat
with good leg to track mat back to middle.
* SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT
NORDIC
CUSTOMER SERVICE DIRECTLY.
M AT A D JU S T M E N T B O LTS -U S E
A LLEN KE Y T O A D JU T M A T A S
IN S TR U C T E D BE LO W .
